How to Make a Maple Stir from Pure Maple Syrup

Nothing is sweeter than a delicious maple stir. Today we are going to show you how to make one from pure maple syrup. 

Things you will need:
  • Pure maple syrup (8 oz. makes about 4 stirs)
  • Stainless steel pot
  • Candy thermometer (goes to minimum of 240°F)
  • Bowls and spoons
Process
  • Heat the pure maple syrup in the pot to 235°F.  Be very careful to prevent the syrup from foaming up and boiling over and out of the pot.  Adjust the heat as necessary to prevent this, yet still raising the temperature of the syrup.  
  • Promptly remove the syrup from the heat at 235°F, allowing it to cool in the pot to 175°F.  This will take approximately 10 minutes.
  • Pour approximately 1.5 - 2 oz of syrup into each bowl and begin stirring quickly. 
  • Syrup will start to thicken and lighten in color as it sets up into a creamy treat.
  • Enjoy! 

Comments

Post a Comment

Popular posts from this blog

DIY Portable Hobby RO

Image
This post will walk through the basic principles of reverse osmosis for maple sugaring, general design considerations for a DIY hobby unit, and an overview of multiple DIY portable hobby RO units i have built.   I use Membrane Solutions 400 and 500 gpd membranes and am incredibly happy with their performance and quality.  Here is a link to the Membrane Solutions Amazon store : General Principles: Reverse osmosis is a process by which pure water (called permeate) is created through filtration at the molecular level through semi permeable membranes, facilitated by an applied pressure (normally from a booster pump).  This removes unwanted ions, particles, molecules, and even bacteria from the water output (permeate). The "waste" output (called concentrate) is full of all the items removed from the feed water.  In maple sap applications the concentrate is what we are keeping and leads to less water to boil out of the sap, or, in other words, a higher sugar...
Read more

Vacuum Filter / Steam Bottler - Hobby/DIY

Image
Does anyone else find filtering to be one of the most frustrating (and slow) parts of sugaring? I do.  If you are a small/hobby producer and are using a set of cone filters like I have been, it's awful.  It's slow.  It wastes your precious syrup.  And the results can leave some niter which settles out later - not attractive in nice glass bottles. Filter presses (like the big producers use) work awesome but they aren't conducive to smaller scale hobbyists.  First, they are expensive.  Second, they require a fairly large minimum volume of syrup for processing (5 gallons might be my entire season!).  Third, fairly involved set up, tear down, and cleaning. So what is an alternative? A vacuum filter . You can achieve drastic improvement over cone filtering (time and quality) at a fraction of the cost of a filter press. This year I built a vacuum filtering unit that also has a steam pan to keep the filtered syrup at a constant temperature for bottl...
Read more